Dell PowerEdge T410 - Environmental Specifications; Maximum Input Amps; ENERGY STAR Compliance; Table 6. Environmental Specifications

Dell
PowerEdge T410 Technical Guide 22
5.4 Environmental Specifications
Table 6 summarizes the environmental specifications for the PowerEdge T410.
Environmental Specifications Table 6.
Temperature
Operating
10° to 35°C (50° to 95°F) with a maximum
temperature gradation of 10°C per hour
Note: For altitudes above 2950 feet, the
maximum operating temperature is derated
1°F/550 ft.
Storage
-40° to 65°C (-40° to 149°F) with a maximum
temperature gradation of 20°C per hour
Relative Humidity
Operating
20% to 80% (non-condensing) with a maximum
humidity gradation of 10% per hour
Storage
5% to 95% (non-condensing) with a maximum
humidity gradation of 10% per hour
Maximum Vibration
Operating
0.25 Grms at 3–200Hz for 15 minutes
Storage
1.54 Grms at 3–200Hz for 15 minutes
Maximum Shock
Operating
One shock pulse in the positive z axis (one pulse
on each side of the system) of 31G for 2.6ms in
the operational orientation
Storage
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes (one pulse
on each side of the system) of 71G for up to 2ms
Altitude
Operating
-16 to 3048m (-50 to 10,000ft) Note: For
altitudes above 2950 feet, the maximum
operating temperature is de-rated 1°F/550ft
Storage
-16 to 10,600m (-50 to 35,000ft)
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985 (G1 maximum corrosive contaminant levels
measured at ≤ 50% relative humidity)
5.5 Maximum Input Amps
The power supply or power supplies are equipped with automatic input voltage detection.
5.6 ENERGY STAR Compliance
ENERGY STAR
®
qualified configurations can be accessed from the ENERGY STAR Compliance results
landing page on Dell.com.