v If a cartridge is in the drive, the ready/activity LED flashes green and the SCD flashes moving in a
figure eight pattern until the cartridge is rewound.
v The ready/activity LED turns on solid and the SCD stops flashing in a figure eight pattern when
the rewind is complete and the tape drive is ready.
Note: Allow at least 10 minutes for the rewind process to complete.
2. To eject the cartridge, push the eject button one more time. If the tape cartridge still will not eject,
contact trained service personnel for assistance.
Notice: If you are not a trained service person, do not attempt to open the drive for repairs as this
will void your warranty.
48 Dell PowerVault LTO Tape Drive: User's Guide
To Next Page
Loading...
