Table 13. Rack Mount drive specifications (continued)
Physical Specifications
Length 44.0 cm (17.32 in)
Height 9.0 cm (3.54 in)
Weight 10.23 kg (22.55 lb) Chassis empty
Power Requirements
AC line voltage 100 - 240 VAC
Line frequency 50 - 60 Hz, auto-ranging
Line current at 100 VAC 1.9 A
Line current at 240 VAC 0.8 A
Performance
Interface 6 GB SAS
Recording format LTO Ultrium Generation
Media LTO Ultrium
Capacity LTO8-12000 GB (Native) 30000 GB (compressed,
assuming 2.5:1 compression)
LTO7-6000 GB (Native) 15000 GB (compressed, assuming
2.5:1 compression)
LTO6-2500 GB (Native) 6250 GB (compressed, assuming
2.5:1 compression)
LTO5-1500 GB (Native) 3000 GB (compressed, assuming
2:1 compression)
LTO4-800 GB (Native) 1600 GB (compressed, assuming
2:1 compression)
LTO3-400 GB (Native) 800 GB (compressed, assuming 2:1
compression)
Data transfer rate (maximum) LTO8-300 MB/sec Native
LTO7-300 MB/sec Native
LTO6-160 MB/sec Native
LTO5-140 MB/sec Native
LTO4-120 MB/sec Native
LTO3-80 MB/sec Native
Burst transfer rate Up to 600 MB/sec
Operating Limits
Temperature 10° to 38°C (50° to 100°F)
Humidity 20% to 80% relative humidity (non-condensing)
Maximum wet bulb temperature 26°C (79°F)
Non-operating Limits (Storage or Shipping)
Temperature -40° to 60° (-40° to 140°F)
Humidity 10% to 90% relative humidity (non-condensing)
Maximum wet bulb temperature 26°C (79°F).
52 Dell PowerVault LTO Tape Drive: User's Guide
To Next Page
Loading...
