4. Carefully return the library to an upright position.
Important: Do not stack objects on top of the library.
Removing and Storing the Shipping Lock
Important: The shipping lock, which prevents the library accessor from moving
during shipment, must be removed before the library is powered ON.
The shipping lock is held in place with a label and is located in the top center of
the library. After the shipping lock is removed, it should be stored on the right side
of the back panel of the library for future use.
To remove and store the shipping lock:
1. Remove the blue label (
2
) that is securing the lock (
1
) to the top of the
library, then remove the lock (see Figure 1-2 on page 1-4).
1
a77ug085
Figure 1-1. Installing foot pads on the bottom of the library enclosure
Installation 1-3
To Next Page
Loading...
