Dell PP14L - Changing Your Audio Settings; Enabling the Display Settings for a TV

Using CDs, DVDs, and Other Multimedia 45
7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on
the computer.
8 See "Enabling the Display Settings for a TV" on page 45 to ensure that the computer
recognizes and works properly with the TV.
Changing Your Audio Settings
You can set the speaker configuration for PC speakers, headphones, or S/PDIF (digital output).
1
Double-click CyberLink PowerDVD in the All Programs menu.
2 Click Settings .
3 Click DVD .
4 Click Audio Settings .
5 Under Speaker Configurations , select your desired output.
6 Click Back twice to return to the main menu.
If you selected
SPDIF in step 5, also verify the following settings:
a Exit PowerDVD.
b Double-click the speaker icon in the Windows notification area.
c Click the Options menu and then click Advanced Controls .
d Click Advanced .
e Click Enable S/PDIF .
f Click Close .
g Click OK .
h Reopen PowerDVD.
7 Insert a DVD into the DVD drive.
The DVD will autorun.
Enabling the Display Settings for a TV
NOTE: Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel .
2 Click Appearances and Themes .
3 Under or pick a Control Panel icon , click Display .
4 Click the Settings tab and click Advanced .
5 Click the Nvidia GeForce tab.