Dell Precision 3431 Small Form Factor Service Manual

7. Install the:
a) Front bezel
b) Side cover
8. Follow the procedure in After working inside your computer.
Memory module
Removing memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Side cover
b) Front bezel
c) Hard drive and optical drive module
3. To remove the memory module:
a) Pry open the retention tabs from both sides to lift the memory module from the connector [1].
b) Remove the memory module from the system board [2].
Removing and Installing components
41

Dell Precision 3431 Small Form Factor Specifications

General

Brand	Dell
Model	Precision 3431 Small Form Factor
Category	Desktop
Language	English