3. Remove the battery.
About this task
The figure indicates the location of the SSD and provides a visual representation of the removal procedure.
Steps
1. Locate the SSD on your computer.
2. Remove two (M2x3) screws that secure the SSD module to the computer.
3. Remove the SSD thermal plate and slide the SSD out of the computer.
Installing the SSD
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the SSD and provides a visual representation of the installation procedure.
Disassembly and reassembly
41
To Next Page
Loading...
