NOTE: Ensure that the Dell Ultra-speed Drive Duo Card bracket is installed correctly in the slot.
4 Install the:
a Riser 1 module
b Top cover
5 Follow the procedure in After working inside your computer.
Removing riser 2 module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Top cover
3 To remove the riser 2 module:
a Locate the blue points on the riser 2 module. Grab the blue points and lift the riser 2 module away from the system chassis.
68
Removing and installing components
To Next Page
Loading...
