30 | Setting up the monitor
8. Remove the cover from the monitor.
Using the tilt, swivel, and height adjustment
NOTE: The following instructions are applicable only for the stand that
is shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
Tilt, swivel and height adjustment
With the stand attached to the monitor, you can tilt the monitor for the most
comfortable viewing angle.
5°
30°
30°
130 mm
21°
NOTE: The stand is detached when the monitor is shipped from the
factory.
To Next Page
Loading...
