Dell S2425HS - Connecting Your Monitor

32 | Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
NOTE: Dell monitors are designed to work optimally with the Dell supplied
cables inside the box. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable management guide before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for illustration only. The appearance of the
computer may vary.
To connect your monitor to the computer:
1. Turn o your computer and disconnect the power cable.
2. Connect the HDMI cable from your monitor to thecomputer.
3. Connect the power cable to the monitor and the wall outlet.
4. Turn on your monitor.
5. Select the correct input source from the OSD menu on your monitor and then
turn on your computer.
Connecting the HDMI cable
HDMIHDMI
HDMI