Dell S2425HS - Removing the Monitor Stand

Setting up the monitor | 35
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the stand,
ensure that the monitor is placed on a soft surface and handle it carefully.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To remove the stand:
1. Place a at cushion or a sitting mat near the edge of a table and place the
monitor on it with the display facing down.
2. Press and hold the stand-release button.
3. Lift the stand up and away from the monitor.
3
2
To remove the side I/O cover:
Lift the side I/O cover up to release from the back of the display.