58 | Operating the monitor
Setting the maximum resolution
NOTE: The steps may vary slightly depending on the version of Windows
you have.
To set the maximum resolution for the monitor:
In Windows 10 and Windows 11:
1. Right-click on the desktop and click Display Settings.
2. If you have more than one monitor connected, ensure that you select
S2425HS/S2725HS.
3. Click the Display Resolution dropdown list and select 1920 x 1080.
4. Click Keep changes.
If you do not see 1920 x 1080 as an option, you must update your graphics
driver to the latest version. Depending on your computer, complete one of the
following procedures:
If you have a Dell desktop or laptop:
• Go to https://www.dell.com/support, enter your service tag, and download the
latest driver for your graphics card.
If you are using a non-Dell computer (laptop or desktop):
• Go to the support site for your computer and download the latest graphic drivers.
• Go to your graphics card website and download the latest graphic drivers.
To Next Page
Loading...
