Dell S3221QS - Page 56

56 │ Operating your monitor
Dell P2418HZ
Dell 32 Monitor
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
?
No HDMI signal from your device.
If HDMI or DisplayPort cable is not connected, a floating dialog box as shown below
appears. The monitor will enter Standby Mode after 4 minutes if left at this state.
Dell P2418HZ
Dell 32 Monitor
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/S3221QS
?
S3221QS
or
Dell P2418HZ
Dell 32 Monitor
No DP Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/S3221QS
?
S3221QS
From the OSD menu when a user selects any predetermined option (without a
symbol) that increases the power consumption of the display, the following power
warning message is displayed: