14 │ About your monitor
Monitor specifications
Model S3221QS
Screen type Active matrix-TFT LCD
Panel type Vertical Alignment
Viewable image
Diagonal
Horizontal, Active Area
Vertical, Active Area
Area
800.1 mm (31.5 in.)
697.3 mm (27.5 in.)
392.3 mm (15.4 in.)
273550.8 mm
2
(423.5 in.
2
)
Native resolution and
refresh rate
3840 x 2160 at 60 Hz
Pixel pitch 0.18159 mm x 0.18159 mm
Pixel per inch (PPI) 139
Viewing angle
Horizontal
Vertical
178° (typical)
178° (typical)
Luminance output 300 cd/m² (typical)
Contrast ratio 3000 to 1 (typical)
Faceplate coating Anti-glare with 3H hardness, Haze 25%
Backlight LED edgelight system
Response time 8 ms gray to gray in Normal mode
5 ms gray to gray in Fast mode
4 ms gray to gray in Extreme mode*
* The 4 ms gray-to-gray mode is achievable in the
Extreme mode to reduce visible motion blur and
increased image responsiveness. However this may
introduce some slight and noticeable visual artifacts
into the image. As every system setup and every user's
needs are different modes to find the setting that is
right for them.
To Next Page
Loading...
