Using Your Projector 33
Connect Projector Directly to the Computer
A.Cable Connections
5
Connect the LAN cable to the projector and the computer.
B.Network Switch/Hub
6
Connect the LAN cable to the projector and the computer via the network
switch/hub.
7
DHCP of LAN Settings switches to
On
.
NOTE: If the DHCP setting is set to On, the IP sharing device will
automatically assign a set of IP Address, Subnet Mask, and Gateway.
POWER
RESET
WAN
LAN1LAN2LAN3LAN4
To Next Page
Loading...
