Item Name Indicator Code
• Blinking amber (on 1 sec. / o 1 sec.) – Drive identication is enabled
• Steady amber – Drive has a fault
SCv360 Expansion Enclosure Drive Numbering
The Storage Center identies drives as XX-YY, where XX is the unit ID of the expansion enclosure that contains the drive, and YY is the
drive position inside the expansion enclosure.
An SCv360 holds up to 60 drives, which are numbered from left to right in rows starting from 0.
Figure 23. SCv360 Drive Numbering
28
About the SCv3000 and SCv3020 Storage System
To Next Page
Loading...
