About your monitor │ 9
Product features
The Dell SE2423DS/SE2723DS monitor has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor has the
following features:
• SE2423DS: 60.45 cm (23.80 in.) viewable area display (measured diagonally).
• SE2723DS: 68.47 cm (27 in.) viewable area display (measured diagonally).
• 2560 x 1440 resolution, with full-screen support for lower resolutions.
• AMD FreeSync Technology, which minimizes graphic distortions like screen
tearing and stuttering for smoother, fluid gameplay.
• Supports 48 Hz to 75 Hz (DisplayPort and HDMI) in FreeSync Mode.
• Supports audio line out to connect an external speaker.
• Color gamut of 99% sRGB (typical).
• Digital connectivity with DisplayPort and HDMI.
• Plug-and-Play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of setup and screen optimization.
• Removable stand and Video Electronics Standards Association (VESA) 100 mm
mounting holes for flexible mounting solutions.
• Tilt, and height adjustment capabilities.
• Power and OSD buttons lock.
• Security-lock slot (for Kensington locks, sold separately).
• Stand lock.
• ≤0.3 W in Standby Mode.
• TÜV-certified ComfortView Plus and Flicker-free.
• This monitor uses low blue light panel. When the monitor is reset to factory
settings or default setting (Preset mode: Standard) it works in compliance with
TÜV Rheinland (hardware solutions provider).
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, which includes but is not
limited to eye fatigue and digital eye strain. TÜV-certified ComfortView
Plus feature is designed to reduce the amount of blue light emitted
from the monitor to optimize eye comfort.
To Next Page
Loading...
