Dell Vostro 3030 - Optical-Drive Bezel; Removing the Optical-Drive Bezel

Next steps
1. Install the front cover.
2. Install the left-side cover.
3. Follow the procedure in After working inside your computer.
Optical-drive bezel
Removing the optical-drive bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the front cover.
4. Remove the optical drive.
About this task
NOTE: Depending on the configuration ordered, your computer may not have an optical drive installed.
The following image indicates the location of the optical-drive bezel and provides a visual representation of the removal
procedure.
Removing and installing Customer Replaceable Units (CRUs)
53