Next steps
1. Replace the battery
2. Replace the base cover
3. Replace the SD memory card
4. Follow the procedure in after working inside your computer
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD card
3. Remove the base cover
4. Remove the battery
Steps
1. Remove the M2x3 screw that secures the WLAN card bracket to the system board [1].
2. Slide and remove the WLAN card bracket that secures the WLAN cables[2].
3. Disconnect the WLAN cables from the connectors on the WLAN card [3].
4. Lift the WLAN card away from the connector [4].
Disassembly and reassembly
23
To Next Page
Loading...
