Next steps
1. Install the display bezel
2. Install the display assembly
3. Install the hard drive assembly
4. Install the WLAN
5. Install the battery
6. Install the base cover
7. Install the SD card
8. Follow the procedure in after working inside your computer
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD card
3. Remove the base cover
4. Remove the battery
5. Remove the WLAN
6. Remove the hard drive assembly
7. Remove the system fan
8. Remove the VGA daughterboard
76
Disassembly and reassembly
To Next Page
Loading...
