Next steps
1. Install the power button board
2. Install the display assembly
3. Install the hard drive assembly
4. Install the system fan
5. Install the VGA daughterboard
6. Replace the WLAN
7. Install the battery
8. Install the base cover
9. Install the SD card
10. Follow the procedure in after working inside your computer
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD card
3. Remove the base cover
4. Remove the battery
5. Remove the memory module
6. Remove the WLAN
7. Remove the SSD
8. Remove the hard drive assembly
9. Remove the heatsink
10. Remove the system fan
11. Remove the display assembly
Disassembly and reassembly
63
To Next Page
Loading...
