Installing the display back-cover
About this task
Place the display back-cover on a clean and flat surface.
Next steps
1. Install the display cable
2. Install the camera
3. Install the display hinge
4. Install the display panel
5. Install the display bezel
6. Install the display assembly
7. Install the hard drive assembly
8. Install the WLAN
9. Install the battery
10. Install the base cover
11. Install the SD card
12. Follow the procedure in after working inside your computer
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD card
86
Disassembly and reassembly