Dell Vostro 3481 - Installing the Display Cable

8. Remove the VGA daughterboard
9. Remove the display assembly
10. Remove the display bezel
11. Remove the display panel
12. Remove the display hinges
Steps
1. Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly [1].
2. Lift the camera cable and the display cable off the display back-cover and antenna assembly [2].
Installing the display cable
Steps
1. Place the display cable and camera cable on the display back-cover and antenna assembly [1].
2. Route the display cable and camera cable through the routing guides on the display back-cover and antenna assembly [2].
Disassembly and reassembly
83