Dell Vostro 3481 - VGA Daughterboard; Removing the VGA Daughterboard

Next steps
1. Install the battery.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedures in After working inside your computer.
VGA Daughterboard
Removing the VGA daughterboard
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the base cover
3. Remove the battery
Steps
1. Disconnect the VGA daughterboard cable from the VGA daughterboard [1].
2. Remove the two (M2x3) screws that secure the VGA daughterboard to the palm rest and keyboard assembly [2].
3. Lift the VGA daughterboard away from the system [3].
Disassembly and reassembly
41