Dell Vostro 3491 - Touchpad; Removing the Touch Pad Assembly

Next steps
1. Replace the speakers
2. Replace the battery
3. Replace the base cover
4. Replace the SD memory card
5. Follow the procedure in after working inside your computer
Touchpad
Removing the touch pad assembly
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Remove the battery
Steps
1. Remove the two (M2x2) screws that secure the touch pad bracket to the palmrest and keyboard assembly [1].
2. Lift the touch pad bracket off the palm rest and keyboard assembly [2].
42
Removing and installing components