Dell Vostro 3491 - Installing the Display Cable

4. Remove the battery
5. Remove the WLAN
6. Remove the SSD
7. Remove the hard drive assembly
8. Remove the system fan
9. Remove the heatsink
10. Remove the display assembly
11. Remove the display bezel
12. Remove the camera
13. Remove the display panel
14. Remove the display hinges
Steps
1. Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly [1].
2. Lift the camera cable and the display cable off the display back-cover and antenna assembly [2].
Installing the display cable
Steps
1. Place the display cable and camera cable on the display back-cover and antenna assembly [1].
2. Route the display cable and camera cable through the routing guides on the display back-cover and antenna assembly [2].
Removing and installing components
75