Next steps
1. Replace the display assembly
2. Replace the hard drive assembly
3. Connect the battery cable to the connector on the system board.
4. Replace the base cover
5. Replace the SD memory card
6. Follow the procedure in after working inside your computer
Power-button board
Removing the power button board
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Disconnect the battery cable from the connector on the system board.
5. Remove the WLAN
6. Remove the system fan
7. Remove the hard drive assembly
8. Remove the display assembly
56
Removing and installing components
To Next Page
Loading...
