WLAN card
Removing the WLAN card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b bezel
3 Open the front panel door.
4 To remove the WLAN card:
a Loosen the M2.5*6.3 captive screw to release the plastic tab that secures the WLAN card to the computer [1].
b Remove the plastic tab to access the WLAN cables [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
d Lift the WLAN card from the connector on the system board [4].
Installing the WLAN Card
1 Insert the WLAN card to the connector on the system board.
2 Connect the WLAN cables to the connectors on the WLAN card.
3 Place the plastic tab on the WLAN card and tighten the M2.5*6.3 screw to secure the WLAN card to the system board.
4 Close the front panel door.
5 Install the:
a bezel
b cover
6 Follow the procedure in After working inside your computer.
14
Removing and installing components
To Next Page
