102 Removing and Installing Parts
4
Prepare the new hard drive for installation and check the documentation for the hard drive to verify
that the drive is configured for your computer.
NOTE: If hard drive you are installing does not have the hard drive bracket attached, use your original hard
drive bracket; snap the bracket onto the new drive.
5
Verify that the hard-drive bay is empty and unobstructed.
6
Slide the hard drive into the hard-drive bay until it clicks securely into place.
1 hard drive 2 hard drive bracket
1
2
book.book Page 102 Thursday, July 20, 2006 11:10 AM
To Next Page
Loading...
