106 Removing and Installing Parts
4
Rotate the drive panel toward the computer until it snaps into place on the drive panel.
5
Replace the computer cover (see "Replacing the Computer Cover" on page 125).
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
Removing a Floppy Drive
1
Follow the procedures in ""Before You Begin" on page 75."
2
Remove the computer cover (see "Removing the Computer Cover" on page 76).
3
Remove the drive panel (see "Removing the Drive Panel" on page 104).
4
Disconnect the power and data cables from the back of the floppy drive.
1 drive release latch 2 drive panel 3 drive panel tabs
2
1
3
book.book Page 106 Thursday, July 20, 2006 11:10 AM
To Next Page
Loading...
