126 Removing and Installing Parts
5
Carefully, lift the rear of the computer and slide the stabilizing feet outward into the open position.
6
With the help of an assistant, carefully set the computer upright.
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
7
Connect your computer and devices to electrical outlets, and turn them on.
1 computer cover 2 cover hinge tabs 3 hinge slots
2
1
3
book.book Page 126 Thursday, July 20, 2006 11:10 AM
To Next Page
Loading...
