Appendix 137
Auto Power On
(
Off
default)
Disables or selects when to automatically turn on the computer.
•
Off
— Do not use the
Auto Power Time
.
•
Everyday
— Turn the computer on every day at the time set in
Auto Power
Time
.
•
Weekdays
— Turn the computer on Monday through Friday at the time set in
Auto Power Time
.
NOTE: This feature does not work if you turn off your computer using a power
strip or surge protector.
Auto Power Time Specifies the time to automatically turn on the computer.
Change the time to automatically turn on the computer by pressing the up- or
down-arrow key to increase or decrease the numbers, or type the numbers in
the appropriate time field.
NOTE: This feature does not work if you turn off your computer using a power
strip or surge protector.
Suspend Mode
(
S3
default)
Specifies the power management suspend mode.
•
S1
— The computer resumes more quickly from sleep mode.
•
S3
— The computer conserves more power when not in use (system memory
remains active).
Maintenance
Service Tag Displays the system service tag.
Load Defaults This setting restores the computer’s factory-installed default settings.
•
Cancel
— Do not restore factory-installed default settings.
•
Continue
— Restore factory-installed default settings.
Event Log Displays the system event log.
•
Mark all entrie
s — Mark all event log entries as read (R).
•
Clear log
— Clear all event log entries.
NOTE: Once an event log entry is marked as read (R) that entry cannot be
marked as unread (U).
POST Behavior
Fastboot
(
On
default)
Enables or disables the option to speed up the boot process by skipping some
compatibility tests.
•
Off
— Do not skip any steps in the boot process.
•
On
— Boot quickly.
Numlock Key
(
On
default)
Enables or disables the numerical and mathematical features of the rightmost
bank of keys on the keyboard.
•
Off
— Right keypad keys function as arrows.
•
On
— Right keypad keys function as numbers.
book.book Page 137 Thursday, July 20, 2006 11:10 AM
To Next Page
Loading...
