80 Removing and Installing Parts
1 white memory module connectors (DIMM_1-2)
support memory modules or memory module
risers
15 PCI-Express x16 card slot (SLOT4)
2 black memory module connectors (DIMM_3-4)
support memory modules only when no memory
riser cards are installed; otherwise these must be
left empty
16 PCI card slot (SLOT5)
3 hard drive fan connector (FAN_HDD) 17 PCI card slot (SLOT6)
4 IDE drive connector (IDE) 18 PCI-Express x8 card slot (SLOT7)
5 front I/O panel connector (FRONTPANEL) 19 RTC reset jumper (RTCRST)
6 back LED connector 20 battery socket (BATTERY)
7 FlexBay connector (INT_USB) 21 password jumper (PASSWORD)
8 main power connector (POWER1) 22 power connector (POWER2)
9 SATA connectors (SATA0-5) 23 floppy drive (DSKT)
10 front USB connector (FRNT_USB) 24 card cage fan connector (FAN_CAGE)
11 front panel 1394 connector (FP1394) 25 processor fan connector (FAN2_CPU)
NOTICE: The FAN2_CPU connector is not
currently used on this system and is
reserved for future use. Do not attach the
primary CPU fan to the FAN2_CPU
connector.
12 PCI-Express x1 card slot (SLOT1)
NOTE: This slot is not available in the dual-
graphics configuration
26 primary processor (CPU)
13 PCI-Express x16 card slot (SLOT2) 27 processor fan connector (FAN1_CPU)
14 PCI card slot (SLOT3)
NOTE: This slot is not available in the dual-
graphics configuration
book.book Page 80 Thursday, July 20, 2006 11:10 AM
To Next Page
Loading...
