Top I/O Panel 63
Replacing the Top I/O Panel
1
Follow the instructions in "Before You Begin" on page 13.
2
Align the screw holes on the top I/O panel with the screw holes on the top
panel.
3
Replace the two screws that secure the top I/O panel to the top panel.
4
Connect the top I/O panel cables to the system board connectors, F_USB3
and F_AUDIO1 (see "System Board Components" on page 10).
5
Replace the top cover (see "Replacing the Top Cover" on page 59).
6
Replace the optical drive (see "Replacing the Optical Drive" on page 51).
7
Replace the front bezel (see "Replacing the Front Bezel" on page 29).
8
Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
9
Connect your computer and devices to electrical outlets, and turn them
on.
book.book Page 63 Wednesday, April 25, 2012 12:34 PM
To Next Page
Loading...
