86 Processor
CAUTION: Ensure that the processor cover notch is positioned underneath the
alignment post.
6
When the processor is fully seated in the socket, close the processor cover.
7
Pivot the release lever down and place it under the tab on the processor
cover.
8
Clean the thermal grease from the bottom of the heat-sink.
1 socket 2 processor 3 alignment tabs (2)
4 alignment
notches (2)
5 processor pin-1
indicator
1 alignment post 2 processor cover 3 release lever
4 processor 5 processor cover notch
book.book Page 86 Wednesday, April 25, 2012 12:34 PM
To Next Page
Loading...
