Removing the solid-state drive/Intel Optane
Prerequisites
NOTE: You must disable the Intel Optane memory before removing Intel Optane from your computer. For more
information about disabling the Intel Optane memory, see Disabling Intel Optane.
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the graphics card.
About this task
The following images indicate the location of the solid-state drive/Intel Optane and provide a visual representation of the removal
procedure.
Steps
1. Remove the screw (M2x2.5) that secures the solid-state drive/Intel Optane to the system board.
2. Slide and lift the solid-state drive/Intel Optane from the M.2 card slot on the system board.
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
34
Removing and installing components
To Next Page
Loading...
