Steps
1. Place the computer on its side with the left side facing up.
2. Press down on the securing clip to disconnect the graphics-card power cables from the graphics card.
3. Slide the lock mechanism on the graphics-card support bracket to release it from the chassis.
4. Slide and lift the graphics-card bracket off the chassis.
NOTE: The size of the graphics-card bracket may vary depending on the graphics card configuration on your computer
5. Using the tab, lift and open the PCIe door.
6. Press and hold the securing tab on the graphics-card slot to release the graphics card from the PCIe x16 slot on the system
board.
26
Removing and installing components
To Next Page
Loading...
