20
FOR THE INSTALLER
This cookers has class 2/1 overheating protection so that it can be installed next to the
cabinet where the height is greater than the cooker (minimum distance 50 mm - fig. 21).
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered syntetical material and the glue used must be resistant to a temperature of
120°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a
room containing a bath or shower.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
Fig. 21
Location
To Next Page
Loading...
