DeLonghi Magnifica Start - Initial Setup and Water Filter Management; Connecting and Priming the Machine; Water Softener Filter Installation and Activation

6
E4. Milk intake tube
E5. Remove carafe/remove carafe connector button
E6. Milk carafe connector
E7. Milk container
3. SETTING UP THE APPLIANCE
Please note:
• When using the machine for the rst time, all removable
accessories making contact with water or milk should
be rinsed with hot water. It is advisable to wash the milk
carafe (E) (see section”14. Thorough cleaning of milk
carafe”).
• Any traces of coee that may be found in the mill are left
by the factory tests carried out on the machine before it
goes on sale — evidence of the meticulous care we have
for the product.
• The rst time the machine is used, the water circuit will
be empty and the appliance could be very noisy.The noise
becomes less as the circuit lls.
• When starting the machine for the rst time, make cer-
tain that the water spout (D5) is tted.
1. Connect the appliance to the mains supply (g. 1).
1 2
1 2 3 4 5
2. The indicator (C2) will light up on the control panel
(B) (g. 2) : remove the water tank (A9) (g. 3) , ll up to
the MAX level with fresh drinking water ( g. 4) , then
reposition in the appliance.
3 4
3. The Led (B2) on the control panel will blink rapidly.
4. Position a container under the coee spout (A16) and
water spout (D5) (g. 5).
5
1 2 3 4 5
6
5. Press the button (g. 6): the internal water circuits
start to ll and the appliance will release hot water from
the water spout.
6. The ow will be interrupted, then after a few seconds, the
machine releases water from the coee spout.
When the ow of water stops completely, the machine is ready
for use.
Please note:
• The rst time the appliance is used, it will be necessary to
make 4-5 cappuccinos before the drink in the cup tastes
as it should.
• It is recommended that the water lter supplied be in-
stalled immediately. After two months (see date indica-
tor), or after 3 weeks if the appliance has not been used,
the lter should be replaced or removed even if the warn-
ing indicator (C1)is not alight.
• Select the appropriate water hardness setting as soon as
possible (section “5. Measuring water hardness”).
4. WATER SOFTENER FILTER
To ensure the performance of the machine remains constant
over time, we recommend using a De’Longhi water softener
lter.
For more information, visit the www.delonghi.com website.
EAN: 8004399327252
To use the lter correctly, follow the instructions below.
1. Remove the lter (D4) from the pack and turn the date
indicator so that it shows the next 2 months (g. 7);