13
2. Once the cup is lled to the desired level, press the drink but-
ton a second time: delivery of the rst ingredient stops and
delivery of the second ingredient begins;
3. Once the cup is lled to the desired level, press the button
again: delivery ceases and the quantity is stored.
Please note!
• To cancel the current setting, press a button corre-
sponding to another drink.
10. DELIVERING HOT WATER
Danger of scalding!
Never leave the machine unattended when hot water is being
released.
1. Lower the ap and t the hot water spout (g. 28).
28
29
2. Place a container under the hot water spout (g. 29) (as
close as possible to avoid splashes).
3. Press the Hot water button .
4. Delivery will stop automatically. To terminate the delivery
sooner, press the button a second time.
Please note:
In energy saving mode, a few seconds may elapse before hot
water emerges as the machine must heat up.
10.1 Customizing the quantity of hot water
1. Press the Hot water button
and hold for a few seconds:
the light blinks rapidly to indicate that the programming
menu is active. Delivery begins;
2. Once the cup is lled to the desired level, press the button
again: delivery ceases and the quantity is stored.
Default
(ml)
Programmable (ml)
250
from ≃ 20 to ≃ 420
Please note!
To cancel the current setting, press a button corresponding to any
drink
11. TIPS FOR ENERGY SAVING
• To reduce energy consumption, remove the milk carafe
after one or more drinks have been delivered;
• Set auto-o to 15 minutes (see “12. Settings menu”);
• Enable Energy Saving (see “12. Settings menu”);
• Always carry out the descaling cycle when prompted by
the machine.
12. SETTINGS MENU
Having accessed the menu, the buttons that remain active can be used to select the corresponding functions:
(*)
Drinks diering according to model
1 2 3 4 5
Access to
settings menu
Selection of
settings
Auto-o
Water hardness
Coee temperature
Energy saving
(*)
Water softener lter
Beep
To Next Page
Loading...
