Delta-q QUIQ Series - Page 45

QuiQ Charger Troubleshooting
45
• If this problem does not clear after the
battery voltage is measured to be less than
2.5V per cell, contact the manufacturer of
your vehicle/ machine or the distributor
of the charger for servicing.
•
This fault will automatically clear and the
charger will restart charging when the
voltage drops to within operating range.
LOW BATTERY VOLTAGE DETECTED
Flashes (Red):
Starting voltage below 0.5V/cell
•
Check that the battery charger voltage is
consistent with the battery pack voltage.
•
Check the battery and connections to the
battery.
•
If this problem does not clear after the
battery voltage is measured to be higher
than 1V per cell and all connections are
good, contact the manufacturer of your
vehicle/ machine or the distributor of the
charger for servicing.
• This fault will automatically clear when
the oltage returns within range.