To Next PageTo Next Page
Need help?Do you have a question about the Delta 11-990C and is the answer not in the manual?
Emphasizes reading the instruction manual before operating the tool for safety.
Stresses the mandatory use of safety glasses during operation to prevent eye injuries.
Highlights the importance of a clean workspace to prevent accidents and injuries.
Advises on appropriate clothing and footwear to avoid entanglement with moving parts.
Details precautions to take to avoid accidental tool startup before use.
Mandates securely fastening the drill press to a stand or workbench for stability.
Instructs to clear the table before operation and keep hands away from the bit.
Recommends using only approved accessories and the right tool for the job.
Crucial step to ensure the chuck key is removed before powering on the drill press.
Advises locking the switch in the "OFF" position to prevent unauthorized operation.
Guide to carefully unpack the drill press and all supplied loose items.
Instructions for removing protective coating and cleaning the table surface.
Critical safety reminder to complete assembly before connecting to power.
Details on connecting the drill press column securely to the base.
Steps for installing the worm gear and raising rack for table adjustment.
Guide to slide the table assembly onto the drill press column.
Instructions for re-assembling the ring and tightening the set screw for the raising rack.
Steps for threading the clamp handle into the table bracket.
Instructions for placing the head onto the column and tightening locking screws.
Guide to threading the pinion shaft handles into the pinion shaft.
Proper procedures for cleaning spindle taper and installing the chuck.
Instructions on securing the drill press base to a supporting surface to prevent tipping.
Specifies circuit requirements, wire gauge, and fuse protection for the tool.
Details the tool's operating voltage, frequency, and motor speed.
Provides essential grounding instructions to prevent electric shock.
Table showing recommended wire gauges for extension cords based on length and amperage.
Instructions on how to turn the drill press ON and OFF using the main switch.
Method for locking the switch in the "OFF" position to prevent unauthorized use.
Procedure for raising or lowering the drill press table using handles.
Steps for rotating the table 360 degrees and tilting it to various angles.
Explanation of how to use the tilt scale to set the desired table angle accurately.
Diagram and explanation of how to set pulleys for different spindle speeds.
Step-by-step guide for safely changing belt positions to alter spindle speed.
Instructions on how to properly tension the drive belt for optimal performance.
Guide on setting the depth stop for consistent drilling to a specific depth.
Instructions on how to adjust the spindle return spring tension if necessary.
Advice on positioning and securing workpieces to prevent rotation and injury.
Detailed steps for inserting, centering, and removing drill bits using the chuck key.
Guidance on techniques for boring holes in wood, including bit selection and preventing splintering.
Key considerations for drilling metal, focusing on workpiece security and drill bit care.
Information on the availability of accessories and a warning about using un-tested ones.
Contact information and locations for obtaining parts, service, and warranty assistance.
Details of the two-year limited warranty, including coverage and exclusions.
General
