Delta 18-900L User Manual

Instruction manual
Manuel d’utilisation
Manual de instrucciones
18-900L
Français (23)
Español (45)
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
www.deltaportercable.com
18" (457 mm)
DRILL PRESS
WITH LASERS
Perceuse à Colonne
de 457 mm (18 po)
avec Lasers
Taladro de banco
de 457 mm (18 pulg)
con lásers
CROSSHAIR
OBJETIVO CRUZ
CIBLE CROISÉE

Delta 18-900L Specifications

General

Brand	Delta
Model	18-900L
Category	Drill
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

SAFETY GUIDELINES - DEFINITIONS

GENERAL SAFETY RULES

ADDITIONAL SPECIFIC SAFETY RULES

ADDITIONAL SAFETY RULES FOR THE LASERS

Specific safety precautions for operating the laser feature.

ASSEMBLY

ATTACHING DRILL PRESS TO SUPPORTING SURFACE

How to secure the drill press base to a stable surface.

ASSEMBLING DRILL PRESS PARTS

ASSEMBLING HEADSTOCK TO COLUMN AND BASE

INSTALLING THE CHUCK

OPERATION

OPERATIONAL CONTROLS AND ADJUSTMENTS

Overview of the machine's controls and how to adjust them.

STARTING AND STOPPING 18-900L

Procedures for safely starting and stopping the drill press.

LOCKING SWITCH IN THE "OFF" POSITION

How to secure the switch to prevent unauthorized use.

TURNING ON WORK LIGHT AND LASERS

Instructions for activating the laser guide and the LED work light.

TABLE ADJUSTMENTS

Tilting table back to front from zero (0) to 45 degrees

Tilting table right to left from zero (0) to 90 degrees

RAISING AND LOWERING THE SPINDLE

ADJUSTING THE SPINDLE RETURN SPRING

CHECKING LASER ADJUSTMENT

SPINDLE SPEEDS

CHANGING SPEEDS AND ADJUSTING BELT TENSION

DRILLING HOLES TO DEPTH

Setting zero

How to set the zero point for depth control.

Set depth

MACHINE USE

DRILLING METAL

INSTALLING AND REMOVING DRILL BITS

DRILLING WOOD

TROUBLESHOOTING

MAINTENANCE

KEEP MACHINE CLEAN

SERVICE

REPLACEMENT PARTS

SERVICE AND REPAIRS

WARRANTY