22
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at www.
deltaportercableservicenet.com. You can also order parts from your nearest factory-owned
branch, Authorized Warranty Service Center or by calling End User Services at (800) 223-7278 to
receive personalized support from one of our highly-trained representatives.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call
1-800-223-7278
for a free replacement.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information
about DELTA Machinery, its factory-owned branches, or to locate an Authorized Warranty Service
Center, visit our website at www.deltaportercable.com or call our End User Services at (800) 223-
7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others. By calling this number
you can also find answers to most frequently asked questions 24 hours/day.
You can also write to us for information at DELTA Machinery, 4825 Highway 45 North, Jackson,
TN 38302-2468 - Attention: End User Services. Be sure to include all of the information shown on
the nameplate of your tool (model number, type, serial number, date code, etc.)
SERVICE
TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL BEFORE OPERATING PRODUCT. ALWAYS USE PROPER EYE AND RESPIRATORY PROTECTION. DO NOT WEAR GLOVES, NECKTIES, JEWELRY OR LOOSE
CLOTHING. ALWAYS CLAMP WORKPIECE OR BRACE IT AGAINST COLUMN TO PREVENT ROTATION. KEEP HANDS AWAY FROM ROTATING BIT OR ACCESSORY. USE RECOMMENDED SPEED FOR THE DRILL AND WORKPIECE MATERIAL.
BE SURE DRILL BIT OR CUTTING TOOL IS NOT DAMAGED AND PROPERLY LOCKED IN THE CHUCK BEFORE OPERATING. MAKE CERTAIN CHUCK KEY IS REMOVED BEFORE STARTING DRILL PRESS. DISCONNECT MACHINE FROM POWER SOURCE BEFORE MAKING
REPAIRS OR ADJUSTMENTS. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DE INSTRUCCIONES ANTES DE OPERAR EL PRODUCTO. SIEMPRE UTILICE PROTECCIÓN ADECUADA PARA LOS OJOS Y VÍAS RESPIRATORIAS.
NO USE GUANTES, CORBATAS, JOYAS NI ROPA HOLGADA. SIEMPRE SUJETE LA PIEZA DE TRABAJO CON ABRAZADERAS O AMÁRRELA CONTRA LA COLUMNA PARA EVITAR LA ROTACIÓN. MANTENGA LAS MANOS LEJOS DE
LA BROCA O ACCESORIOS GIRATORIOS. USE LA VELOCIDAD RECOMENDADA PARA EL TALADRO Y EL MATERIAL DE LA PIEZA DE TRABAJO. ASEGÚRESE DE QUE LA BROCA DEL TALADRO O LA HERRAMIENTA DE CORTE NO ESTÉN DAÑADAS Y DE QUE ESTÉN
CORRECTAMENTE BLOQUEADAS EN EL PORTABROCAS ANTES DE SU OPERACIÓN. ASEGÚRESE DE RETIRAR LA LLAVE DE PORTABROCAS ANTES DE ENCENDER LA PRENSA DE TALADRO. DESCONECTE LA MÁQUINA DE LA FUENTE DE ALIMENTACIÓN ANTES DE REALIZAR
REPARACIONES O AJUSTES. NO EXPONGA A LA LLUVIA NI UTILICE EN LUGARES HÚMEDOS.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L’UTILISATEUR DOIT LIRE LE MODE D’EMPLOI AVANT D’UTILISER LE PRODUIT. TOUJOURS UTILISER UNE PROTECTION OCULAIRE ET RESPIRATOIRE ADÉQUATE. NE
PAS PORTER DE GANTS, CRAVATES, BIJOUX OU VÊTEMENTS AMPLES. TOUJOURS FIXER LA PIÈCE OU BIEN LA CALER CONTRE LA COLONNE POUR EMPÊCHER UNE ROTATION. TENIR VOS MAINS ÉLOIGNÉES DE
LA MÈCHE ROTATIVE OU ACCESSOIRE. UTILISER LA VITESSE RECOMMANDÉE POUR LA PERCEUSE ET LE MATÉRIEL DE LA PIÈCE À PERCER. S’ASSURER QUE LA MÈCHE OU L’ORGANE DE COUPE N’EST PAS ENDOMMAGÉ ET QU’IL EST BIEN VERROUILLÉ DANS
LE MANDRIN AVANT SON UTILISATION. S’ASSURER DE RETIRER LA CLÉ DU MANDRIN AVANT DE DÉMARRER LA PERCEUSE DE COLONNE. DÉBRANCHER LA MACHINE DE LA SOURCE D’ALIMENTATION AVANT D’EFFECTUER DES RÉPARATIONS OU DES RÉGLAGES.
NE PAS L’EXPOSER À LA PLUIE ET NE PAS L’UTILISER DANS UN ENDROIT HUMIDE.
Since accessories other than those offered by DELTA have not been tested
with this product, use of such accessories could be hazardous. For safest operation, only
DELTA recommended accessories should be used with this product.
A complete line of accessories is available from your DELTA Supplier, Porter-Cable • DELTA
Factory Service Centers, and DELTA Authorized Service Stations. Please visit our Web Site
www.deltaportercable.com for a catalog or for the name of your nearest supplier.
ACCESSORIES
Five Year Limited New Product Warranty
DELTA will repair or replace, at its expense and at its option, any new DELTA machine, machine part, or machine
accessory which in normal use has proven to be defective in workmanship or material, provided that the
customer returns the product prepaid to a DELTA factory service center or authorized service station with proof
of purchase of the product within five years and provides DELTA with reasonable opportunity to verify the alleged
defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be
responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration
made or specifically authorized by anyone other than an authorized DELTA service facility or representative.
Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective
products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth
the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied,
whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA. For further
detail of warranty coverage and warranty repair information, visit www.deltaportercable.com or call (888) 848-
5175. This warranty gives you specific legal rights and you may have other rights which vary in certain states or
provinces.
WARRANTY
To register your tool for warranty service visit our website at www.deltaportercable.com.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products
sold in Latin America, see country specific warranty information contained in the packaging, call
the local company or see website for warranty information.
To Next Page
Loading...
