Delta DP300L - User Manual

INSTRUCTION MANUAL
12" Bench Drill Press
(w/Laser Guides)
(Model DP300L)
PART NO. A14210-10-27-05 Rev. B
Copyright © 2005 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
ESPAÑOL: PÁGINA 21
FRANÇAISE : PAGE 41
Note: Rockler may not carry all products and/or sizes listed in this vendor's publication
21450
RTD10000255AA

Delta DP300L Specifications

General

Brand	Delta
Model	DP300L
Category	Drill
Language	English

Summary

General Safety Rules

General Safety Precautions

Laser Safety

Laser Safety Warnings

Critical warnings for eye safety and proper laser usage.

Power, Grounding, and Extension Cords

Power Connections and Grounding

Details on motor specs and essential electrical grounding.

Assembly Procedures

Operation

Controls and Operation

Covers starting, stopping, locking switch, and lamp operation.

Table Adjustments

Table Height, Rotation, and Tilt

How to adjust the height, rotation, and tilt of the drill press table.

Adjustments: Spring and Lasers

Spindle Return Spring

Laser Alignment and Intersection

Procedures for aligning and intersecting the laser guides.

Drill Bit Operations

Bit Installation and Removal

Step-by-step instructions for bit installation and removal.

Maintenance and Support