To Next PageTo Next Page
Need help?Do you have a question about the Delta 28-276 and is the answer not in the manual?
General| Type | Band Saw |
|---|---|
| Blade Length | 93-1/2 inches |
| Cutting Capacity Width | 13-1/2 inches |
| Cutting Capacity Height | 6 inches |
| Motor | 1 HP |
| Table Size | 15-3/4 x 18-7/8 inches |
| Blade Width | 1/8 to 3/4 inches |
Defines safety alert symbols used in the manual.
Warns about chemicals in dust from construction activities.
Explains the necessity and procedure for grounding the machine.
Instructions for unpacking, cleaning, and protecting the machine.
Step-by-step instructions for assembling the Model 28-206 enclosed stand.
Instructions for installing and tensioning the drive belt between the motor and saw pulleys.
How to install the table insert into the main table.
How to turn the band saw on and off using the power switch.
Instructions for setting the correct tension on the band saw blade.
Guide on adjusting the upper blade guide assembly position.
Adjusting the lower blade guides and support bearing after upper adjustments.
General advice and best practices for operating the band saw.
A guide to diagnose and resolve common band saw problems.
Contact information for Delta parts, service, and warranty assistance.
