To Next PageTo Next Page
Need help?Do you have a question about the Delta 28-293 and is the answer not in the manual?
Details on electrical connections and circuit requirements for the tool.
Technical details of the saw's motor, including voltage and frequency.
Essential steps for proper tool grounding to protect against electric shock.
Recommended wire gauges for extension cords based on length and amperage.
Step-by-step guide for assembling the band saw components.
Instructions for mounting the motor onto the band saw stand.
Procedure for installing the pulley onto the motor shaft.
Steps to securely mount the band saw unit to its base.
How to install and adjust the V-belt for proper tension and alignment.
Installing the protective guard for the belt and pulleys.
Instructions for mounting the power switch to the saw arm.
How to operate the power switch to start and stop the tool.
Method for securing the switch to prevent unauthorized use.
Installing the table insert into the saw's work surface.
Adjusting the work table to different angles for cuts.
Setting the table to be perpendicular to the blade.
How to set the correct tension for the saw blade.
Aligning the blade to run correctly on the wheels.
Positioning the upper blade guide assembly relative to the workpiece.
Fine-tuning the upper blade guides and support bearing for optimal performance.
Fine-tuning the lower blade guides and support bearing.
Steps for safely replacing the saw blade.
Information, care, and specifications for band saw blades.
General guidelines and best practices for running the band saw.
Techniques for cutting curved shapes with the band saw.
Information about available optional accessories for the band saw.
Details of the manufacturer's limited warranty for the product.
General
