Need help?Do you have a question about the Delta 28-185 and is the answer not in the manual?
General| Type | Band Saw |
|---|---|
| Blade Length | 93-1/2 inches |
| Motor | 1 HP |
| Table Size | 15-3/4 x 18-7/8 inches |
| Motor Power | 1 HP |
Essential safety rules for safe operation and hazard avoidance.
Mandates wearing eye protection, proper apparel, and footwear.
Ensures proper grounding and keeping tools in top condition.
Covers avoiding environmental hazards, children, drugs, and improper use.
Ensures the band saw is fully assembled and securely installed.
Safe practices for adjusting blade guides, tension, and feeding material.
Checks for damaged parts and use of recommended accessories.
Includes keeping area clean, not forcing the tool, and saving instructions.
Illustrates and lists all items included in the band saw packaging.
Guides on installing the table locking handle assembly.
Details on placing the table and engaging its mounting rib.
Instructions for attaching the table to the saw frame.
Instructions for fitting the rip fence to the table surface.
Details on how to tighten or loosen the rip fence's clamping action.
Instructions for anchoring the band saw to prevent tipping or sliding.
Specifies electrical circuit needs and protection for safe connection.
Details the band saw's voltage and AC frequency requirements.
Guidelines for selecting and using appropriate extension cords.
Explains how grounding protects the operator from electric shock.
Details on using grounded outlets and adapters.
Advises checking receptacle grounding and consulting electricians.
Instructions on using the power switch to turn the saw on and off.
Method for preventing accidental startup by removing the switch toggle.
Procedure for accessing internal components for adjustments.
Guide to adjusting blade tension for proper performance and blade life.
Procedure to align the blade on the wheels for optimal cutting.
Setting the upper guide assembly relative to the workpiece.
Adjusting guides and bracket for blade sides and gullets.
Setting the support bearing behind the blade edge.
Guide adjustments for lower guides and bracket for specific blade widths.
Positioning, locking, and aligning the accessory rip fence.
Adjusting table angle for cuts and ensuring it's square to the blade.
Detailed steps for safely removing and installing new saw blades.
Setting the miter gage to the desired cutting angle.
Connecting the dust chute for dust collection.
Utilizing the holder to store the adjusting wrench.
Adjusting the brush for cleaning sawdust.
To Next Page
