Fig.30
DUST CHUTE
A dust chute (A) Fig, 30, is supplied with your bench band
saw and is equipped with a 1-1/2" I.D. opening that can
easily be connected to a dust collection system.
Fig. 31
WRENCH HOLDER
A wrench holder (A) Fig. 31, is supplied on the back of the
saw frame to hold the adjusting wrench (B). The adjusting
wrench (B) is used for most of the adjustments on the band
saw, and the holder (A) enables you to store the wrench
with the saw and prevent the wrench from being lost.
BLADE AND
WHEEL BRUSH
A blade and wheel brush (A) Fig. 32, is supplied inside
the band saw frame to prevent sawdust and chips from
traveling with the blade. The brush can be adjusted by
loosening screw (B) and adjusting holder (A) closer to the
wheel. Then tighten screw (B).
Fig. 32
&
AAD m LTA
0
0
o
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
o
o
o
Delta Building Trades and Home Shop Machinery
Two Year Limited Warranty
Delta will repair or replace, at its expense and at its option, any Delta machine,
machine part, or machine accessory which in normal use has proven to be defective
in workmanship or material, provided that the customer returns the product
prepaid to a Delta factory service center or authorized service station with proof of
purchase of the product within two years and provides Delta with reasonable
opportunity to verify the alleged defect by inspection. Delta may require that
electric motors be returned prepaid to a motor manufacturer's authorized station
for inspection and repair or replacement. Delta will not be responsible for any
asserted defect which has resulted from normal wear, misuse, abuse or repair or
alteration made or specifically authorized by anyone other than an authorized Delta
service facility or representative. Under no circumstances will Delta be liable for
incidental or consequential damages resulting from defective products. This
warranty is Delia's sole warranty and sets forth the customer's exclusive remedy,
with respect to defective products; all other warranties, express or implied, whether
of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by
Delta.
0
o
0
0
o
0
o
0
o
0
0
0
0
0
0
0
14
Printed in U.S.A.
To Next Page
Loading...
Need help?
General
