To Next PageTo Next Page
Need help?Do you have a question about the Delta Platinum Edition 28-263 and is the answer not in the manual?
Identifies the specific Delta Platinum Edition 14" Band Saw model number.
Covers reading the manual, guards, eye protection, apparel, clean area, tool usage, and securing work.
Addresses tool condition, maintenance, disconnecting power, and preventing unintentional starts.
Provides specific safety rules for blade adjustment, tracking, and material handling.
Lists external organizations and publications for further safety information.
Details the capabilities and features of the Delta Model 28-263 Band Saw.
Instructions for removing protective coating and preparing surfaces after unpacking.
Describes initial steps of assembly, including removing stand panels and preparing for motor mounting.
Describes removing panels for motor access.
Details motor placement and bolting.
Describes feeding the power cord through the stand.
Explains how to attach the pulley.
Describes attaching the saw unit to the stand.
Explains how to align pulleys.
Details installing the belt and adjusting tension.
Describes installing the guard.
Covers attaching the switch assembly to the arm.
Details routing and securing the switch cord.
Discusses electrical circuit requirements and fuse.
Lists voltage and frequency.
Explains proper grounding procedures.
Explains using the start/stop buttons.
Describes how to secure the switch with a padlock.
Describes how to place the insert.
Explains the procedure for tilting.
Details how to adjust the stop for a right angle.
Explains setting tension via graduations.
Describes how to center the blade on the wheels for proper tracking.
Explains positioning the guide close to the material.
Explains setting roller bearings away from the blade.
Describes adjusting lower guides and bearings.
Outlines steps for changing the blade.
Covers blade types, width, and maintenance.
Lists reasons for blade breakage.
Specifies blade lengths for different configurations.
Emphasizes checking adjustments and guards.
Advises on keeping the blade sharp and proper feed.
Explains how to cut curves and handle abrupt turns.
Lists optional accessories.
Details available blade types, widths, lengths, and teeth per inch.
Outlines the warranty coverage.
General
